Our Blog

Orthodontic treatment involves a lot more than just straightening your teeth. For a healthy smile, your bite must be healthy as well! This means that the upper and lower jaws need to fit together properly and comfortably.

If your bite is out of alignment because of jaw misalignment, orthodontic treatment can help correct the shape and position of your jaws with devices called functional appliances. These appliances are most often used for young patients whose bones are still growing, and are designed to treat malocclusions, or bite problems.

Common malocclusions such as overbites and overjets can occur when the upper teeth protrude further than they should, or the lower jaw is positioned too far back, or both. The Twin Block appliance can be used in such cases to help move your lower jaw and teeth into alignment with your upper jaw.

Why “Twin”? Because the Twin Block appliance is two separate pieces, each made of wire and smooth acrylic. Both pieces are crafted to fit precisely over your upper and lower arches and can be adjusted as your treatment progresses. The top plate can also be adjusted, if necessary, to widen the upper palate.

Why “Block”? Acrylic blocks cover the biting surfaces of several of your upper and lower teeth. These blocks fit together like a 3D puzzle. When you bite down, the upper blocks interlock with the lower blocks, pushing the lower blocks forward just a bit before you can bite down completely. Over time, bit by bit (and bite by bite), the Twin Block appliance advances your lower jaw and teeth to create a balanced, comfortable bite.

For the quickest and best results, you should wear your Twin Block appliance as directed. It’s made to be worn comfortably while you sleep, eat, and otherwise go about your day. (It’s a good idea to check with our Coppell, TX orthodontic team to see about removing it when you’re active, especially for swimming and contact sports.) When it’s time to brush, the Twin Block appliance is removable. This means that you can clean your teeth and your appliance easily.

And, while it’s made to work hard for you, it’s not indestructible. Don’t expose your appliance to heat or hot water, as the plastic may warp. Use the cleaning methods we recommend. Finally, when your appliance is out of your mouth, keep it in its case! You don’t want your appliance to end up carefully wrapped in a napkin in the nearby recycling bin. Or, even worse, in your dog’s mouth instead of yours.

The Twin Block appliance might fit together like a puzzle, but there’s nothing puzzling about how to achieve your best and fastest results. Your success really depends on you. Follow Dr. Trevor Bonilla and our team’s advice, wear your appliance as directed, and you’ll be on your way to a healthy, comfortable bite and an attractive, confident smile!

Bite problems are so common that most of us know someone who’s worn braces. So perhaps you’re already familiar with the terms “overbite” and “underbite”—but if you’ve been diagnosed with an “overjet,” that just might be an orthodontic diagnosis that is new to you. If so, here are a few questions and answers to help promote overjet understanding.

Just what is an “overjet”?

An overjet is a type of malocclusion, which means that there’s a problem with your bite, the way your jaws and teeth fit together when you bite down. In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.”

An overjet is a Class II malocclusion, which means that the upper front teeth project further beyond the lower teeth than they should. Overjets and overbites are both Class II malocclusions, and the words are often used interchangeably, but there’s a notable difference between the two conditions.

An overbite occurs when the top teeth overlap the bottom teeth too far vertically, and you can’t see as much of the lower teeth as you should when you bite down.

An overjet is considered more horizontal in nature, where the top teeth project at an outward angle toward the lips instead of pointing straight down toward the bottom teeth. This condition is sometimes called protruding or buck teeth.

What causes an overjet?

The reason for your overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both.

Overjets can run in families. They can also be caused by the size and position of your jaws and the shape and position of your teeth, all of which affect your bite alignment. But early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to overjet development.

How do we treat an overjet?

There are many types of treatment available. Dr. Trevor Bonilla will recommend a treatment plan based on the cause and severity of your overjet. Because some treatments are effective while bones are still growing, age plays a part as well.

• Braces and Aligners

If you have a mild overjet, and minor dental issues are the main cause of the malocclusion, braces or clear aligners can effective.

• Functional Appliances

If the overjet is caused by a problem with upper and lower jaw development, devices called functional appliances can be used to help guide the growth of the jawbones while a child’s bones are still forming.

For young patients, there are several appliances which can help correct an overjet. Some, such as the Twin Block and the Forsus Spring appliances, work inside the mouth, while others, like headgear, are worn externally. Your orthodontist will recommend the most effective appliance for your needs.

• Surgical treatment

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself.

If we recommend surgery, oral and maxillofacial surgeons are experts in surgical procedures designed to create a healthy and symmetrical jaw alignment. Dr. Trevor Bonilla will work with your surgeon to design a treatment plan, which will usually include braces or other appliances following surgery.

Why treat your overjet?

A serious, moderate, or even mild overjet can lead to many dental and medical problems, including:

• Concerns about facial and dental appearance
• Front teeth which are more at risk for injury
• Difficulty closing the lips
• Problems speaking or chewing
• Headaches, facial, and temporomandibular (jaw) joint pain

When you work with our Coppell, TX team to correct your overjet, you’re not just correcting a problem. You’re also creating something—a healthy, comfortable bite, and an attractive, confident smile. We can talk about general answers to your overjet questions, but when it comes to understanding your very individual smile, Dr. Trevor Bonilla will have all the answers you need to make that healthy bite and that confident smile a reality! 

Brackets and wires, clear aligners, lingual braces, regular brackets, self-ligating braces, elastics, spacers—you and your orthodontist have had to narrow down a lot of choices to discover the best treatment for your orthodontic needs. Now that the end of treatment is in sight, there’s one more important choice left—your retainer!

Do I Need a Retainer?

No retainer at all is probably the one option that’s off the table from the start. It’s not just your teeth that have changed position; it’s the bone and ligaments holding them that have changed as well.

A retainer prevents your teeth from moving away from their new, ideal location while your bones and ligaments are stabilizing. This process takes months, so keeping your teeth in place as your bone rebuilds and regains density is crucial.

What Are Your Retainer Options?

Three of the most popular retainer options available at our Coppell, TX office include:

• Hawley Retainers

This is the traditional retainer, with wires to hold your retainer in place and to keep the teeth properly aligned. The wires are attached to an acrylic plate molded to fit the roof of your mouth or around your bottom teeth. You can customize the acrylic base with colors and patterns for a one-of-a-kind look.

Hawley retainers are adjustable, so minor realignments can take place if necessary. The wire in front of your teeth makes these retainers visible, but, after several months of wearing them all day long, you may end up wearing them only at night.

Hawley retainers are removable, so you need to make sure they are safely in a case when you’re not wearing them. Minor damage can often be repaired, but it’s better to be proactive.

• Clear Plastic Retainers

These retainers look like clear aligners. They are formed by heating a thin piece of plastic and vacuum-forming it around a model of your teeth to create a custom, comfortable fit.

Clear retainers are almost invisible when worn, and can be removed when you eat or drink—which they should be, because food particles and liquids can be trapped inside them.

When you’re not wearing it, a clear retainer should always be in its case, because it must be replaced if the plastic is warped, cracked, or broken.

• Fixed Retainers

A fixed retainer is a small single wire bonded to the back of specific teeth, commonly the six bottom front teeth. Because fixed retainers don’t allow the teeth to move at all, they are often recommended for patients who had serious misalignments, extremely crowded teeth, or teeth with large gaps between them.

Many patients like fixed retainers because they keep teeth in perfect alignment, they won’t be seen, they’re comfortably small, and they can’t end up in the cafeteria recycling bin because you forget to replace them after lunch!

Fixed retainers are usually quite durable, but you’ll need to pay attention to your diet, because crunchy and chewy foods can put pressure on the retainer and damage it. These retainers also require special care with brushing and flossing, to make sure the teeth bonded to the wire stay clean and plaque-free.

The Right Retainer

The process of stabilizing your teeth in the jaw takes time. Choosing your retainer will depend in part on how long and how often you need to wear it: fulltime for months or for years, at night after several months of day-and-night wear, or long-term to make sure your orthodontic work lasts.

And there are other variables, as well. Your retainer might need to be removable. It might need to be adjustable. You might need a retainer for just your upper teeth, just your lower teeth, or both. All these factors and more need to be taken into consideration before deciding on your ideal retainer.

Fixed, removable, wire, plastic, colorful, clear—which retainer is right for you? The one that helps you retain the beautiful smile you’ve worked for all these months. Talk to Dr. Trevor Bonilla to discover the retainer that will protect that smile for years to come.

Congratulations! You’ve done the hard work necessary to create your beautiful smile! You’ve carefully completed all the steps needed to reach the end of your orthodontic journey. Well, nearly all the steps. We can’t forget that last step which will ensure that all your hard work is rewarded.

When you first began orthodontic treatment, Dr. Trevor Bonilla decided on the best plan for straightening your teeth and perfecting your bite, whether you wore traditional braces, lingual braces, aligners, or other orthodontic appliances. And now that you’re finishing treatment, there’s one more option to consider—your retainer.

Why do I need a retainer?

While you’ve spent time in treatment, more has changed than just the position of your teeth. The periodontal ligament, the connective tissue that connects the teeth to the jawbone, is stretched as the teeth shift. The bone in your jaw changes, too, reforming and rebuilding around the roots of your teeth as they move to their ideal locations.

These changes happen because your braces or aligners apply gentle, constant pressure to move your teeth. When you’ve finished wearing these appliances, the pressure stops. Ligaments will try to return to their original shape, which can shift teeth back toward their old positions. And the rebuilding bone isn’t dense enough yet to stop teeth from shifting due to the normal, everyday pressures of eating, chewing, and smiling.

A retainer prevents your teeth from moving back, or “relapsing,” by giving your bones and ligaments time to stabilize and rebuild. The process takes months, so keeping your teeth in place as bones rebuild and grow denser is crucial. This is especially important for patients with more serious misalignments. Dr. Trevor Bonilla will let you know which kind of retainer will be best for you and just how long you’ll need to wear your retainer.

Are there different kinds of retainers?

There are! Retainers can be removable or fixed, visible or nearly invisible, metal, plastic, or metal and plastic. Three of the most popular retainer options include:

• Hawley Retainers—the traditional removable retainer, which uses a molded acrylic plate with wires attached to keep your teeth properly aligned and to hold your retainer in place.
• Clear Plastic Retainers—a removable retainer made of custom vacuum-formed plastic, which fits over the teeth like a clear aligner.
• Fixed Retainers—a small single wire bonded to the back of specific teeth, which holds them in place and prevents any movement.

Dr. Trevor Bonilla will let you know whether a removable or fixed retainer is best for making sure your teeth don’t start to relapse, and fill you in on the benefits and care of each type of retainer.

How long do I need to wear a retainer?

There’s no standard answer to this question. Just like your retainer is custom-built to fit your individual teeth, the amount of time you’ll spend in that retainer depends on your individual needs. Retainers might be worn fulltime for months or years, be worn only at night after several months of daily wear, or be worn long-term to make sure your orthodontic work lasts.

Because you’ve done the hard work already, and your beautiful, healthy smile is the result. Talk to a member of our Coppell, TX team about which retainer option will be best for making sure that this smile lasts a lifetime.